PP 조절식 병원용 오버베드 테이블 환자용 ZF-BT022

기술적 매개변수:

기술적 구성:

품질 관리:

• 가스 스프링: 병원용 오버베드 테이블에 통합된 가스 스프링 메커니즘은 기능성과 안전성을 모두 향상시키는 데 중요한 역할을 합니다. 이 디자인을 통해 테이블탑을 다양한 높이로 부드럽고 손쉽게 조정할 수 있어 환자가 식사, 독서 또는 전자 기기를 사용하는 등 특정 요구 사항에 매우 잘 적응할 수 있습니다. 가스 스프링을 사용하면 갑작스러운 움직임의 위험이 줄어들어 우발적 부상 가능성이 최소화됩니다. 또한 힘이나 이동성이 제한된 환자를 포함한 환자가 도움 없이 테이블을 직접 조정할 수 있어 독립성이 더욱 강화됩니다. 오버베드 테이블 디자인에 가스 스프링을 신중하게 통합한 것은 의료 환경에서 환자의 편안함과 안전성에 중점을 두고 있음을 강조합니다.
•  
• 재료: 병원용 오버베드 테이블의 재료 구성은 내구성, 안전성 및 사용 편의성에 크게 기여합니다. 테이블탑은 종종 가볍고 무독성이며 세척하기 쉬운 특성으로 선호되는 PP(폴리프로필렌) 소재로 만들어지므로 위생이 가장 중요한 의료 환경에 이상적입니다. 또한 테이블의 본체와 지지 구조는 일반적으로 알루미늄 합금으로 제작되어 강도와 안정성을 제공하는 동시에 조작하기에 충분히 가볍습니다. 알루미늄 합금은 또한 부식에 강하여 다양한 소독제로 테이블을 자주 세척할 수 있는 병원 환경에서 필수적입니다. 이러한 재료는 함께 오버베드 테이블이 기능적이고 오래 지속되며 일상적인 의료 사용의 엄격한 요구 사항을 견딜 수 있도록 합니다.
•  
• 안전 기준: Hospital overbed table is designed and manufactured to meet stringent safety and quality standards, ensuring they are suitable for medical environments. They comply with the latest ISO 9001 and ISO 13485 standards, which are benchmarks for quality management systems and the specific requirements for medical devices, respectively. Additionally, these tables are certified by the CE marking, affirming that they meet EU safety, health, and environmental protection requirements. In the United States, they adhere to FDA regulations, ensuring that they are safe and effective for their intended use. Compliance with these standards not only guarantees the tables’ reliability and safety but also builds trust among healthcare providers and patients in the quality and safety of the equipment used in medical care.
•  

액세서리 세부 정보:

• • 테이블탑: 병원용 침대 위 테이블의 탁상은 환자의 편의성과 기능성을 염두에 두고 신중하게 디자인되었습니다. 흰색 PP(폴리프로필렌) 소재로 제작되어 깨끗하고 무독성이며 얼룩이 지지 않는 표면을 제공하여 유지 관리와 소독이 쉽고 병원에서 무균 환경을 유지하는 데 필수적입니다. 이 디자인에는 일반적인 사용을 위한 움푹 들어간 부분과 내장형 컵 홀더와 같은 특수 기능이 포함되어 있어 유용성이 향상되었습니다. 움푹 들어간 부분은 책, 의료 기기 또는 식기와 같은 품목을 제자리에 안전하게 고정하여 테이블을 옮기거나 조정할 때 미끄러지는 위험을 최소화하는 데 도움이 됩니다. 또한 통합형 컵 홀더는 유출을 방지하는데, 이는 사고를 방지하고 액체가 중요한 기기와 환자에게 닿지 않도록 하는 의료 환경에서 특히 중요합니다. 이러한 소재 선택과 기능적 디자인의 조합은 탁상을 내구성 있고 위생적일 뿐만 아니라 병원 환자의 다양한 요구에 매우 실용적으로 만들어줍니다.
  •  
  • 던지는 사람: The mobility and stability of hospital overbed tables are significantly enhanced by their caster design, which features four omnidirectional wheels. This setup includes two larger casters with a diameter of 50mm and two smaller casters with a diameter of 25mm. The larger wheels are equipped with independent brakes, providing robust stopping power and ensuring the table remains securely in place when needed. This braking mechanism is crucial for maintaining safety, preventing the table from moving or shifting when patients use it for eating, reading, or supporting medical devices. The smaller wheels, while not braked, contribute to the table’s overall ease of maneuverability, allowing it to glide smoothly over various floor types within the hospital environment. This combination of differently sized wheels optimizes both the table’s mobility for repositioning and its stability when stationary, meeting the dynamic needs of a hospital setting.
  •  
  • 베이스: The base of the hospital overbed table is thoughtfully designed with an aluminum alloy cover, which serves multiple crucial purposes in a healthcare environment. Aluminum alloy, known for its durability and resistance to corrosion, adds structural integrity and longevity to the table. The material’s smooth surface is particularly beneficial in hospital settings as it prevents the accumulation of dust and bacteria, crucial for maintaining a sterile environment. This feature makes the base much easier to clean and disinfect, a vital aspect in preventing hospital-acquired infections. The combination of aluminum alloy and its protective cover ensures that the table not only withstands frequent use and cleaning but also adheres to the high standards of hygiene required in medical settings, thereby safeguarding both patient and staff health.
  •  
  • 리프팅 컬럼: 병원용 침대 위 테이블의 리프팅 컬럼은 알루미늄 합금을 사용하여 세심하게 설계되었으며, 이는 기능적 및 위생적 특성을 모두 향상시킵니다. 이 컬럼은 상단 섹션이 하단 섹션을 감싸는 디자인을 특징으로 하며, 박테리아가 축적될 수 있는 틈새와 틈을 최소화하는 전략적 선택입니다. 이러한 구성은 병원균 확산을 방지하는 것이 가장 중요한 병원 환경에서 매우 유익합니다. 견고성과 내식성으로 알려진 알루미늄 합금은 컬럼이 병원 환경에서 일반적인 잦은 조정과 과중한 사용을 견딜 수 있도록 합니다. 또한 알루미늄 합금의 매끄러운 표면은 세척 및 소독이 쉽고, 이는 무균 환경을 유지하는 데 필수적입니다. 이러한 사려 깊은 디자인은 쉬운 유지 관리를 용이하게 할 뿐만 아니라 병원용 침대 위 테이블의 전반적인 위생 및 안전에 크게 기여합니다.

• 리프팅 컬럼

  • 알루미늄 합금 지지 기둥, 상부 기둥이 하부 기둥과 일체형으로 설계되어 세균 축적을 효과적으로 방지하고 청소가 쉽습니다.

    

    던지는 사람

    네 개의 범용 캐스터. 더 나은 제동을 위한 독립 브레이크가 있는 두 개의 50mm 직경 캐스터. 두 개의 다른 25mm 직경 캐스터.

    

    테이블탑

    물컵과 주요 사용 공간을 위한 움푹 들어간 디자인의 흰색 PP 데스크탑입니다.

    

    높이 조절

    사이드 핸들을 들어올리거나 테이블 상단을 눌러 높이를 조정합니다. 조정 범위는 660mm-945mm입니다.

Height Adjustment Function and Operation Mechanism of PP Adjustable Hospital Moving Table

ZhaofaMed’s PP adjustable hospital overbed table redefines convenience in patient care through its precision-engineered height adjustment system, a core feature that enhances its versatility as a hospital moving table. Designed to adapt to diverse patient needs, this table merges intuitive operation with robust mechanics, making it an essential tool in wards, rehabilitation centers, and home care settings.

The height adjustment range is meticulously calibrated to accommodate various scenarios: from 70cm (ideal for seated patients) to 110cm (suitable for standing or semi-recumbent use). This flexibility ensures compatibility with different bed heights, wheelchairs, and treatment protocols, allowing patients to engage in activities like dining, reading, or medical procedures without leaving their beds. As a hospital moving table, this adaptability transforms static care spaces into dynamic environments, supporting both independence and clinical efficiency.

At the heart of its operation is a gas spring-assisted mechanism, chosen for its smooth, silent performance. The system uses compressed gas to counterbalance the table’s weight, enabling effortless height adjustments with minimal force—even for patients with limited upper body strength. A large, ergonomically positioned release lever (located under the table edge) activates the mechanism; squeezing it unlocks the height lock, allowing users to raise or lower the table to their desired position. Releasing the lever engages a safety lock, securing the table firmly in place to prevent unintended movement—a critical safety feature in busy healthcare settings.

The mechanism’s durability is reinforced by high-grade materials: the adjustment column is crafted from anodized aluminum, resistant to corrosion and wear, while the PP tabletop (smooth, non-porous) adds lightweight stability. This combination ensures the hospital's moving table maintains consistent performance over thousands of adjustments, withstanding frequent use in high-traffic areas.

For caregivers, the intuitive design reduces training time and streamlines patient assistance, as adjustments can be made quickly during rounds. For patients, the ability to control table height fosters a sense of autonomy, enhancing their overall care experience. When paired with the table’s smooth-rolling casters (a hallmark of a functional hospital moving table), the height adjustment system creates a versatile solution that adapts seamlessly to evolving care needs.

In essence, ZhaofaMed’s focus on user-centric engineering transforms this overbed table into more than a utility—it becomes a tool that empowers patients and simplifies care, with height adjustment at its core. This attention to detail solidifies its role as a leading hospital moving table in modern healthcare environments.

Boosting Patient Independence and Care Efficiency: The Role of Adjustable Hospital Moving Tables

ZhaofaMed’s adjustable hospital overbed table, as a versatile hospital moving table, serves as a catalyst for enhancing patient autonomy while streamlining caregiver workflows. Its design prioritizes both self-sufficiency for patients and operational efficiency for staff, making it a transformative tool in healthcare settings.

For patients, the table’s adjustability fosters newfound independence. With height ranges from 70cm to 110cm and smooth angle adjustments (0°–30°), individuals can easily position the table to suit their activities—whether dining, reading, using a tablet, or managing personal items—without relying on assistance. This autonomy is particularly impactful for post-surgery or rehabilitation patients, as it restores a sense of control over daily routines, boosting mental well-being and accelerating recovery. The hospital's moving table’s lightweight PP top (4kg) and easy-glide casters allow patients to reposition it independently, further reducing dependency on staff for minor adjustments.

Caregivers benefit from significant efficiency gains. The table’s intuitive design minimizes the need for constant intervention: its one-touch height lock and stable base eliminate time spent readjusting surfaces during meal times or medication administration. The spacious 80cm×45cm tabletop, featuring built-in cup holders and a recessed tray, organizes essentials (water, meds, utensils) in one place, reducing trips to fetch items—a critical advantage in busy wards. As a hospital moving table, its maneuverability (via 360° rotating casters with brakes) allows seamless movement between beds, enabling staff to serve multiple patients with minimal effort.

Additionally, the table’s compatibility with various care scenarios—from acute wards to home care—enhances workflow consistency. Its durable aluminum frame and easy-to-clean surface (resistant to disinfectants) reduce maintenance time, ensuring it remains functional round-the-clock. For patients requiring frequent monitoring, the table doubles as a stable surface for medical devices (e.g., blood pressure monitors), consolidating care tools and cutting down on setup time.

By bridging patient empowerment and operational efficiency, this hospital's moving table transcends its utility as a mere furniture piece. It becomes a key contributor to better care outcomes—empowering patients to reclaim independence while enabling caregivers to focus on high-priority tasks. In essence, it redefines the role of assistive equipment in fostering a more efficient, patient-centric healthcare environment.